Tips On How To Fix A Fender To Hold Bigger Wheels

It can be a pain trying to find a tire you like that will fit your car’s wheel wells. After all, there are a lot of different sizes and styles on the market, and it can be difficult to know which one to choose.

If you have a set of wheels that are bigger than the fender on your car, it’s not going to be easy to find a way to fix them. In this article, we will provide some tips on how to fix a fender so that it can hold bigger wheels.

List of Tools To Cut Vehicle Fender

There are a few tools that are helpful when cutting fenders. A jigsaw is great for cutting curves, and a coping saw can be used to cut straight lines. Additionally, a Dremel tool can be used to remove material quickly and easily. Don’t forget the floor jack, lug wrench, and the tool for rolling the edge of the rim.

Measure The Fender Trim

If you have a car that has a fender that is too small for the wheels that are currently installed, there are a few things that you can do to fix the problem.

You can either buy new wheels and have the fender cut to fit them, or you can use a trim kit to enlarge the fender. There are several different trim kits available on the market, so it is important to find one that will work best for your car.

To measure the size of the fender that needs to be enlarged, first find the overall width of the wheel. This will help you determine how much material needs to be removed from the fender. Next, determine how wide the wheel rim is.

This will help you determine how much material needs to be added to the fender in order to make it large enough to fit the wheel. Finally, add 1/2 inch onto both of these measurements so that they will equal 3 inches. This will be your starting point for adding material to your fender.

If you want to use a trim kit, there are various types available on the market. You should choose one that has been designed specifically for your car’s body style and dimensions.

Some kits come with all of the necessary hardware and instructions, while others require that you do some additional assembly yourself. Once you have chosen a trim kit, follow all of the manufacturer’s instructions carefully in order to ensure proper installation.

Remove The Wheel

If your car has a wheel that is too big for the fender, it’s time to remove the wheel and replace it with a smaller one. There are a few steps involved in this process:

1. Locate the bolt that holds the wheel onto the fender. Most cars use king-pin style bolts and need a 17 mm wrench to loosen them.

2. Once the bolt is loose, slowly pull the wheel off of the fender. Be careful not to damage either component!

3. If necessary, use an adjustable wrench to tighten up the bolt after removing the wheel. Make sure that it’s tight enough so that there is no movement on the wheel while driving, but not so tight that it damages the fender.

Start Cutting The Fender

There are a few things you can do to help fix a fender that is not holding bigger wheels. The first thing is to measure the tire diameter before starting any repairs. If the fender is too small, it will not hold the wheel securely, and the wheel may spin when the car is driven.

Second, make sure the fender is clean and free of debris. Any dirt or debris will bind to the wheel and make it difficult for the fender to grip it. Finally, use a bit of Bondo or filler to fill in any gaps or holes in the fender. This will help support and keep the wheel secure while driving.

How To Roll The Fender

If you’re looking to get your bike or motorcycle on the road with bigger wheels and tires, there are a few things you need to know about fixing a fender. First, make sure the fender is still attached to the frame.

If it isn’t, you can either remove it completely or attach it using bolts and washers. Second, measure the circumference of your wheel and use this information to determine how much material you need to roll up the fender.

Third, use a hammer and nails to secure the rolled-up fabric around the perimeter of the wheel. Finally, reattach the fender to the frame using bolts and washers.

Install The Bigger Tires

If you’re looking to fit larger tires on your car, there are a few things to keep in mind. First, check the size of the fender wells your car is designed for.

Many cars come with large fender wells that can accommodate tires up to 35 inches wide. If you’re using wider-than-normal tires, you’ll need to get a custom wheel and tire package from a dealer or manufacturer.

Another consideration is the mounting location for the new tires. Most cars use an offset design where the center of the tire is mounted higher than the rim.

This means that if you want to fit a 35-inch tire on a car with an 18-inch wheel, you’ll need to either move the center of the tire down below the rim or get a custom wheel and tire package.

Finally, make sure your suspension is capable of handling the added weight and load. Overloading your suspension can cause it to sag or even collapse under stress, which could lead to burnt rubber and damaged components.

Final Thoughts

Fixing the fender on your bike to accommodate larger wheels can be a daunting task. However, by following a few simple tips, you can make the process much easier.